Stratasys J750
STR750: Learning the Stratasys J750 Polyjet Printer

Stratasys J750

Industrial polyjet 3D printer

Polyjet 3D printing is the cutting edge of what 3D printing can do. It uses CMYK resins blended together each layer to create stunning, lifelike objects. Printers such as the Stratasys J750 make objects that are right at home in a thesis defense, an investment pitch, or any other kind of important event. There really isn't anything else like it among the 3D printing genre.


The Stratasys J750 is a polyjet printer that prints not only in full color, but at an incredibly fine resolution. Parts made on the J750 have a layer height of only 10 micrometers - that's seven times thinner than a single human hair. One of the best perks of the J750 is its ability to print fully articulated models like Rubik's cubes without any assembly required. We've used our J750 to create objects with stunning realism and varying textures; one of our best models is a gear shift with a "leather" handle that feels so real, you'll want to check twice! 

Type: Industrial material jetting printer

Print Volume: 490 x 390 x 200 mm (19.3 x 15.3 x 7.9 inches)

Resolution: Up to 10 microns (0.01 mm)

Materials: Vero, VeroFlex, Tango, Agilus30, VeroClear, SUP705/SUP706B support material

College of Engineering & Applied Science Innovation Wyrkshop
(307) 766-6460  |  wyrkshop.org  |  tkerr1@uwyo.edu
Social Media Icons_Facebook_black.png
Social Media Icons_Insta_Black.png
Social Media Icons_Slack_black.png